©
2019 WEINZIERL ENGINEERING GmbH
Page 4/8
All logical inputs and outputs correspond
with a group object. The current values
are shown in the graphical representa-
tion. A question mark (?) is shown if the
value is not yet valid because it was not
yet received from bus or is not yet sent
to the bus.
A logical gate sends output values only if
all input values are valid.Within the func-
tion submenus, each input of the func-
tion can be set / reset by pressing the
❾
(enter) button for testing purpose.
The associated group telegram of the
output will then be sent on the bus. Use
❻
(arrow up) and
❼
(arrow down) to
navigate between the inputs.
L. Timer Switch-on delay
Timer that switches ON after defined du-
ration (in seconds, set via the ETS). Af-
ter pressing
❾
(enter) countdown will
start. To stop countdown, press
❾
(en-
ter) again during countdown.
M. Timer Switch-off delay
Timer that switches OFF after defined
duration (in seconds, set via the ETS).
After pressing
❾
(enter) countdown will
start. To stop countdown, press
❾
(en-
ter) again during countdown.
N. Timer Switch-on and
–off delay
Timer that switches ON & OFF after de-
fined duration (in seconds, set via the
ETS). After pressing
❾
(enter) count-
down will start and the timer will turn on.
After first countdown is finished, press
❾
(enter) again to start countdown to
turn off. To stop countdown, press
❾
(enter) again during countdown.
O. Timer Impulse (Staircase function)
Timer with impulse that
– after being
switched
ON
–
automatically switches
OFF
after a defined duration (in sec-
onds, set via the ETS). Press
❾
(enter)
to start impulse timer. To stop a count-
down, press
❾
(enter) again during
countdown.
P. Logic AND gate
The output is triggered on (1) if both in-
puts are switched on (1).
Input A
Input B
Output
0
0
0
0
1
0
1
0
0
1
1
1
Q. Logic OR gate
The output is triggered on (1) if one or
both inputs are switched on (1).
Input A
Input B
Output
0
0
0
0
1
1
1
0
1
1
1
1
R. Logic XOR gate
The output is triggered on (1), if the two
inputs are not equal.
Input A
Input B
Output
0
0
0
0
1
1
1
0
1
1
1
0
S. Logic NAND gate
The output is triggered on (1) if one or
both inputs are switched off (0).
Input A
Input B
Output
0
0
1
0
1
1
1
0
1
1
1
0
