©
2019 WEINZIERL ENGINEERING GmbH
Page 8/8
Enabled:
The received broadcast telegram is resent
up to three times in case of a fault.
Programming
The KNX IP Router 752
secure
can be programmed in different
ways by the ETS:
Via KNX Bus
The device only needs to be connected to the KNX bus. The
ETS requires an additional interface (for example, USB) to have
access to the bus. Via this way both the individual address and
the entire application including IP configuration can be pro-
grammed. Programming via the bus is recommended if no IP
connection can be established.
Via KNXnet/IP Tunneling
No additional interface is required. Programming via KNXnet/IP
Tunneling is possible if the device already has a valid IP configu-
ration (e.g. via DHCP). In this case the device is displayed in the
interface configuration of the ETS and must be selected. The
download is executed via the ETS project as with many other
devices.
Via KNXnet/IP Routing
Programming via KNXnet/IP Routing is possible if the device
already has a valid IP configuration (e.g. by using DHCP or Auto
IP). In the ETS, the routing interface appears if at least one
device on the network which supports routing is available. The
name of the network interface appears in the PC as description.
If routing is selected as interface, the programming done from
the ETS project as like with other devices. In this case LAN is
used as a KNX medium like TP. There is no additional interface
device required.
Via direct IP connection
While KNXnet/IP Tunneling and KNXnet/IP Routing is limited to
the speed of KNX TP the device can be loaded via a direct IP
connection at high speed. The direct IP connection is possible if
the device already has a valid IP configuration as well as an
individual address. To do this select "Use direct IP connection if
available" in the ETS menu "Bus – Connections - Options". The
download is then directly performed in the device and is not
visible in the ETS group monitor.
Due to the significantly shorter transmission times it is
recommended to perform downloads via IP.
Open Source Licenses
This product contains open source software license:
curve25519-donna: Curve25519 elliptic curve, public key func-
tion
Source:
http://code.google.com/p/curve25519-donna/
Copyright 2008, Google Inc. All rights reserved.
Redistribution and use in source and binary forms, with or with-
out modification, are permitted provided that the following condi-
tions are met:
Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copy-
right notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
Neither the name of Google Inc. nor the names of its contributors
may be used to endorse or promote products derived from this
software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
WARNING
The device must be mounted and commis-
sioned by an authorized electrician.
The prevailing safety rules must be heeded.
The device must not be opened.
For planning and construction of electric in-
stallations, the relevant guidelines, regulations
and standards of the respective country are to
be considered.
ETS5 Database
www.weinzierl.de/en/products/752/ets5
Datasheet
www.weinzierl.de/en/products/752/datasheet
CE Declaration
www.weinzierl.de/en/products/752/ce-declaration
Weinzierl Engineering GmbH
D-84508 Burgkirchen / Alz
Germany
www.weinzierl.de
2019/07/18
