weintek cMT CTRL01, User Manual

Page: 21 / 53

cMT-CTRL01 User Manual
V1.0.1 18
How to create a cMT-CTRL01 project Chapter4.
This chapter explains how to create a project when cMT-CTRL01 is used as an OPC UA Server. The
basic steps are:
1. Add a driver into Device List in EasyBuilder Pro.
2. Enable OPC UA Server and designate communication address.
3. Download the project to HMI.
The following explains how to set up OPC UA Server in the project.
4.1. Create a new project
Step 1. Launch EasyBuilder Pro and select a cMT-CTRL01.
Step 2. Add a device into the list and configure communication parameters.