Installation and Operating Instructions
Remote Light Dimmer
The Combio-868 LD can be used to switch weinor lighting systems
of the LUX family on and off and to dim them remotely
Intended use
The Combio-868 LD may only be used for controlling the Lux/Lux
Design lighting system and the Lux options attached to various
awnings.
The Combio-868 LD is suitable for controlling electronic trans-
formers with a nominal output of max. 350 W. The remote light
dimmer is built in to the weinor awnings or light systems.
1. Install the lighting system concerned as described in the
instructions supplied with the product.
2. Disconnect from the mains.
3. Connect the light system to the mains properly as described in
the assembly instructions.
4. Turn on the mains supply again.
5. If the Combio-868 LD has been paired with a remote control
unit before delivery, now check that it works. If not, pair the
remote control unit (see next item).
To check, set the remote control unit to the correct channel.
When operating, check that the dimmer is functioning correctly
by pressing UP and DOWN.
38
WeiTronic Combio-868 LD
Summary of Contents for WeiTronic Combio-868 HD 1.5 kW
Page 56: ......
