Opal Design II / LED
Maintenance Instructions and Directions for Use
Version 5
2020-07-06
We reserve the right to make technical changes
Item number
116542-0000
Page 11/13
5.1 Lubricate all moving parts
Product damage
Use greases, sprays or liquids that contain elements of teflon, PTFE or comparable agents. For
best effects, use a water- and dirt-repellent lubricant.
The manufacturer's guidelines must be observed.
Do not use lubricants that corrode plastics.
Lubricating points (X)
•
Flange sleeves in upper arm insert
•
Lubricate the movable components
using lubricants that contain PTFE
5.2 Spare parts
Only spare parts approved by weinor may be used:
6
Adjusting the inclination
Permissible range of adjustment: Opal Design II 5° to 40°, with a projection >351 cm and pitch of
7° - 40°. We recommend setting all awnings to an angle of more than 5°. To adjust the angle of
inclination, open the awning and slightly lift the arm in question to reduce the strain.
CAUTION
