Weinmann VENTIsupport, Description And Operating Instruction

Page: 14 / 22

12
Connecting with existing control lines
If you would like to use on-site control lines
(WM 23772, WM 23770 and WM 23775) to con-
nect to the coverter box
2
you will also need the
8
WM 23928 adapter for the control line.
1. Connect the end of the control line
9
with the con-
verter box
2
. To do this, screw the coupling onto
the input
4
identified as
B
.
2. Plug the adapter
8
WM 23928 into the device
connection
10
.
3. Connection the control line
9
plug with adapter
8
.
Adjusting the COM connection
If you have not connected the therapy device onto the
COM2 connection of your computer, adjust the COM
connection as follows:
1. Please start VENTI support (see "4.1 Starting
VENTIsupport" on page 9).
2. Select the
Serial port
submenu in the
Settings
menu.
3. Select the desired COM connection and click on
OK
.
hmin
mbar
n 4
I /0