19
If you want to start the therapy but there is no
water in your prismaaQUa , the warning signal
appears after 30 seconds and the humidifier
switches off automatically. Please then end the
therapy, fill the humidifier, and start again.
a. Press the unlocking button on the therapy device.
b. Remove the respiratory air humidifier from the side
of the therapy device.
Caution! Risk of injury from hot element!
During and shortly after operation, the element of the respiratory
air humidifier is hot and touching it can cause burns.
Allow the element to cool down completely.
Avoid touching the element.
c. Tilt the respiratory air humidifier carefully
to the left and place it on its side.
d. Fill fresh, cold water up to the mark
(max. 400 ml) through the inlet:
Only use water with a low lime content
or distilled water.
e. Set the respiratory air humidifier
upright again carefully.
f. Connect the respiratory air humidifier to the therapy device and
start the therapy again.
7.3 Alternative filling
Below you can see an alternative filling method that you can use to refill the humidifier quickly.
a. + b.
d.
