WM
6807
1
0
5
/2
021
MEDUMAT Standard
2
EN
65
4 Preparation and operation
The self-test is successful when all of the steps have been
completed. After the self-test, the device displays the start
menu:
2. If one or more steps were not completed:
Do not operate the device.
3. Perform a function check
(see "9.3 Performing a function
Result
The device is ready for use.
4.6 Switching the device off
1. Press and hold the On/Off button
for at least 2 seconds.
2. Shut off the oxygen supply.
Result
The device is completely switched off.
If you switch the device on in NVG mode, the following displays
are deactivated:
•
Alarm light
•
Line power indicator
•
Battery status indicator
•
Audio alarm output
The start screen with the selected NVG brightness appears
Summary of Contents for MEDUMAT Standard2
Page 1: ...MEDUMAT Standard2 Ventilator Instructions for Use for Devices from Software Version 5 1...
Page 269: ......
Page 270: ......
Page 271: ......