106
EN MEDUMAT
Standard
2
WM
6807
1
0
5
/2
021
4 Preparation and operation
4.18 Using the simulation mode
The device features a simulation mode with which settings can
be simulated.
Requirement
The device is switched off.
1. Switch on the device and during start-up press the right-hand
and left-hand navigation knobs at the same time.
The device switches to simulation mode.
The words
Simulation Mode!
flash in the display.
Risk of injury from confusing simulation mode with the
device's normal mode!
The only difference between the two modes are the words
Simulation Mode!
on the display, so it is easy to confuse the
two if overlooked. This can put the patient at risk.
Do not use the simulation mode when the device is in use.
Always switch off and restart the device after using the
simulation mode.
Summary of Contents for MEDUMAT Standard2
Page 1: ...MEDUMAT Standard2 Ventilator Instructions for Use for Devices from Software Version 5 1...
Page 269: ......
Page 270: ......
Page 271: ......