30
Hygiene treatment
EN
Dry breathing tube
You can dry the breathing tube completely with the aid of the SOMNO
vent
CR. To do so,
proceed as follows:
Status: device switched off.
1. Remove the respiratory humidifier if necessary.
2. Remove the plug from the pressure measuring tube.
3. If water gets into the pressure measuring tube by
accident, plug the red drying adapter supplied into the
device outlet port.
4. Plug the adapter of the tube system into the device
outlet port or, if appropriate, onto the red drying
adapter.
5. To start the drying process, press the Menu key until
dr0:30
appears in the display. Press
the Softstart key to start the drying process.
or:
Press the On/Off key and the Softstart key simultaneously.
The device now switches on and dries the breathing tube (time: 30 minutes). The
remaining time is shown in the display. After the end of the drying process, the device
switches off automatically.
– You can interrupt the process at any time by pressing the On/Off key.
– If the breathing tube still has damp places after the drying process, start the drying
process again.
6. Remove the drying adapter if necessary.
6.3 Clean the housing of the SOMNO
vent
CR
Warning! Risk of electric shock!
•
Before cleaning, it is essential to pull the power cord out of the power
connection and the power supply plug out of the socket.
•
Ensure that no liquids get into the device. Never immerse the device in
disinfectants or other liquids, otherwise this can result in damage to the
device and thus a hazard to users and patients.
