4
Description
Power supply
Power for operating the appliance and charging the
power pack can be drawn:
• from the built-in power pack
• from a 12-volt electrical cable system, using the
connecting cable WM 10650 which is available
as an accessory.
• from the mains and charger unit WM 2645
which is available as an accessory.
Important
The AC adapter/charger plug
appliance is only designed for charging the power
pack with the appliance switched off. It must not be
used to operate the appliance itself, as this will over-
load it and cause it to overheat.
The voltage indicator
shows the charge status of the
power pack.
Charging of the power pack starts automatically as
soon as the appliance is switched off and connected
to an external power supply (see “10. Technical Data”
on page 37).
