8
Assembly
3. Assembly
ACCUVAC Basic is supplied ready for use.
Important
Before using ACCUVAC Basic for the first time, fully
charge the power pack (see “4.4 Charging
ACCUVAC Basic” on page 16).
3.1 Assembly with wall bracket
To mount ACCUVAC Basic on a wall, use wall
bracket WM 15208, available as an accessory.
1. Find a suitable mounting location on an
even
,
ver-
tical
surface. The outline of the ACCUVAC on the
drilling template shows the space required.
2. Hold up the drilling template and level it with a
spirit level.
3. Mark the required screw holes on the mounting
location.
4. Drill the screw holes with a Ø 3 mm drill.
5. Screw the wall bracket on with the screws sup-
plied.
6. Push the appliance plug
of the connection ca-
ble or of the mains/charger unit into the guide rail
of the wall bracket until it engages with the
tongue.
Important:
the mounting substrate must be suffi-
ciently strong to hold the wall bracket and the
ACCUVAC securely in accordance with
CEN 1789 Medical Vehicles and their Equip-
ment - Road Ambulances.
110
mm
115 mm
˘
3 mm
