Operating Manual Sesam 800 from Åkerströms
Replacing Batteries
If the indication LED on the transmitter indicates low battery power, replace the batteries promptly. Be-
fore changing the batteries note that changing of batteries must take place in a clean environment free
from static electricity.
The batteries are changed as follows:
1.
Open the battery cover by unscrewing the 6 outer screws on the rear side of the transmitter
housing.
2.
Carefulle remove the cover by lifting up the top of the battery cover.
3.
Remove the used batteries and insert new batteries.
4.
Close the cover by first inserting the rear of the cover into the transmitter and then push the top
back down.
5.
Tighten the 6 screws (torque 1,0 Nm).
Fig 4