WEILOR WHC 321 BLACK, Instructions For Use Manual

Page: 48 / 57

48
EN
FUNCTION OF THE DEVICE
Using the Timer as a Minute
Minder
Using the Timer Setting the timer to switch off
the required heating area
You can use the timer in two different ways:
•
You can use itasa minute minder. In thiscase,
thetimerwill notturnany cooking zone offwhen
the set time is up;
•
You can set it to turn one cooking zone
offafterthe set time is up;
•
You can setthe timer up to 99 minutes.
If you are not selecting any cooking zone
1. Make sure the cooktop isturned on.
2. Touch the controls of the timer ,the minute
minder indicator will flash.
3. Set the time using the slider sensor.
•
If the setting time exceeds 99 minutes, the
timer will automatically return to 0 minute.
4. When the sensor slider has been set to “-“,
the timer will turn off.
5. When the time is set, it will begin to count
down immediately. The display w ill show the
remaining time and the timer indicator will
flash for 5 seconds.
6. Buzzer will bips for 30 seconds and
the timer indicator shows “-- “ when the
settingtimefinished.
•
If the setting time exceeds 99 minutes, the
timer will automatically return to 0 minute.
3. When the time is set, it will begin to count
down immediately. The display will show the
remaining time and the timer indicator flash for
5 seconds.
4. Moving the sensor slider to the left, the timer
turns off.
5. When the set time expires, the corresponding
timer will automatically turn off the heating
zone.
1. Select the cooking zone by touching the zone
you want to set the timer and select the power
level, touch the button of the timer then
touch the timer sensor, use the sensor slider to
confirm the action.
2. Set the time by touching the control of the
timer .
Note:
You can use the minute minder even if you’re
not selecting any cooking zone .
Note:
The red dot next to power level indicator will
illuminate indicating that zone is selected.
Note:
Move the slider from to , to increase
or decrease the time.
Timer