background image

Prevent combustion air contamination

  If the boiler combustion air inlet is located in any area likely to cause contamination, or if products which 

would contaminate the air cannot be removed, you must have the combustion air and vent re-piped and 

terminated to another location. Contaminated combustion air will damage the boiler, resulting in possible 

severe personal injury, death or substantial property damage.

 

Do not operate an SlimFit boiler if its combustion air inlet is located in a laundry room or pool facility, 

for example. These areas will always contain hazardous contaminants.

 

Pool and laundry products and common household and hobby products often contain fluorine or chlorine 

compounds. When these chemicals pass through the boiler, they can form strong acids. The acid can eat 

through the boiler wall, causing serious damage and presenting a possible threat of flue gas spillage or 

boiler water leakage into the building.

 

Please read the information listed below. If contaminating chemicals will be present near the location of 

the boiler combustion air inlet, have your installer pipe the boiler combustion air and vent to another 

location, per the Boiler manual.

Products to avoid

Areas likely to have contaminants

Spray cans containing chloro/fluorocarbons

Dry cleaning/laundry areas and establishments

Permanent wave solutions

Swimming pools

Chlorinated waxes/cleaners

Metal fabrication plants

Chlorine-based swimming pool chemicals

Beauty salons

Calcium chloride used for thawing

Refrigeration repair shops

Sodium chloride used for water softening

Photo processing plants

Refrigerant leaks

Auto body shops

Paint or varnish removers

Plastic manufacturing plants

Hydrochloric acid/muriatic acid

Furniture refinishing areas and establishments

Cements and glues

New building construction

Antistatic fabric softeners used in clothes dryers

Remodeling areas

Chlorine-type bleaches, detergents, and cleaning 
solvents found in household laundry rooms

Garages with workshops

Adhesives used to fasten building products and 
other similar products

Part number 550-100-088/0814

8

SlimFit

 

gas

-

fired

 

water

 

boiler

 — 

User’s Information Manual

Summary of Contents for SlimFit 550

















Reviews: