上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
17
/
36
3
Quick Start
This section mainly introduces the operations to quickly use
Double-tool CNC
System
for machining.
The process for quick start is as follows:
1.
2.
3.
4.
5.
Set the loading point for robots
6.
If there is no special instruction, the above operations are executed in
Operator
interface.
3.1
Load a Tool Path
This operation is used to load a tool path for machining.
Before loading a tool path, prepare a tool path file.
To load a tool path, click
and select the target tool path file.
The loaded tool path shows in the function window.
3.2
Set the Workpiece Origin
This operation is used to set the origin of the workpiece coordinate system by
clearing workpiece coordinates of each axis, so as to define the coordinate origin in
the tool path file before machining.
To set the workpiece origin, do the following:
1.
Optional:
If the target station is not the default one, click
Station
in the
function control area to switch to the target station.
The system supports station
G54
and station
G55
. The default station is
G54
.
2.
3.
4.
