Specialized Concentrated Focused
「
50
」
Menu Functions
[Start for Near Point]
If the job is not cut thoroughly in the process of cutting, manually move the cut head to the to-be-cut
point, and then click this item to make the system resume machining from the point on the tool path
nearest to the current point.
The default radius centered around the current point is 100mm, which cannot be modified by the user.
[Simulation (F8)]
It corresponds to the Simu button on the machine control bar.
[Dry Run]
It corresponds to the DryRun button on the machine control bar.
[Frame Check (F7)]
After load of a machining file, clicking on this menu item will make the system move around along the
circumscribed rectangle of the machining file to decide the machining range. Frame check is optional.
[Teaching]
For the convenience of editing special-shaped tool path, the software is equipped with teaching
function so as to help the user draw a machining path manually according to the shape and contour of
workpiece.
Clicking
―Teaching‖ will eject the following dialog, as shown in Fig. 4-40.
Fig. 4-40 Teaching dialog
The software automatically calculates
―Path No.‖ and ―Node No.‖, which cannot be modified manually.
Path No.: a path is confirmed after started and ended.
A node is a control point of a curve to control the shape of the curve, including linear node and
circular node.
