Weidmüller 2599430000, Manual

Page: 44 / 744

44 2599430000/00/04.2019
Loading Material
4 Loading Material
4.1 Loading Media from Roll
5
7
8
6
9
2
1
3
4
Figure 9 Loading Media from Roll
f
Turn ring (2) counterclockwise, so that the arrow points to the symbol , and thus release the margin
stop (1).
f
Remove the margin stop (1) from the roll retainer (4).
f
Load label roll (3) on the roll retainer in such a way that the labels can be inserted into the printhead in the
right position. The printing side of the labels must be visible from above.
f
Re-mount the margin stop (1) onto the roll retainer (4). Push the margin stop (1) to the roll (3) until the roll
touches both margin stops and a clear resistance is encountered.
f
Turn ring (2) clockwise, so that the arrow points to the symbol , and thus fix the margin stop (1) on the
roll retainer (3).
f
Turn lever (8) counterclockwise to open printhead.
f
Position guides (5) by turning the knob (7) so that they are several millimeters wider than the material.
f
Position material below the roller (6) and guide it through the print unit.
ATTENTION!
Guide material through the print unit below the label sensor (9).