Weidmuller IE-WL-BL-AP-CL User Manual Download Page 55

Page: 55 / 76

Wi-Fi device IE-WL-BL-AP-CL

Web Console Configuration

3-55

NOTE

If the Password-strength test option is enabled, you will be prompted to use passwords that adhere to the
following password policy:

•

The password must contain at least one digit: 0, 1, 2, …, 9.

•

The password must contain both upper and lower case letters:

•

A, B, …, Z, a, b, …, z.

•

The password must contain at least one of the following special characters:

•

~!@#$%^&-_|;:,.<>[]{}

•

The password must have more characters than the minimum password length (default = 4).

Misc. Settings

Additional settings to help you manage your IE-WL-BL-AP-CL are available on this page.

Reset button

Setting

Description

Factory Default

Always Enable

The device

’s Reset button works normally.

Always enable

Disable the Factory
Reset Function after 60
Seconds

The device

’s

reset to default function will be inactive 60

seconds after the IE-WL-BL-AP-CL finishes booting up.

Troubleshooting

This feature allows you to quickly obtain the current system status and provide diagnostics information to

Weidmüller

engineers.

To export the current device information, click

Export

For cases where advanced troubleshooting is required, contact a Weidmüller engineer who can provide you
with an encrypted script file. The encrypted script file can capture additional details on the system.

To run the script, browse to and select the script file using

Browse

and click

Run Script

after you have filled

in the following details:

Summary of Contents for IE-WL-BL-AP-CL













































































Search results

Summary of Contents for IE-WL-BL-AP-CL

Reviews:

Related manuals for IE-WL-BL-AP-CL

Brands by name

Popular brands

Weidmuller IE-WL-BL-AP-CL, User Manual

Search results

Summary of Contents for IE-WL-BL-AP-CL

Reviews:

Related manuals for IE-WL-BL-AP-CL

Brands by name

Popular brands