11
11. Insert a Pulley (32) under the Short Cable (31).
Attach the Pulley (32) inside the Center Frame
(7) with an M10 x 55mm Bolt (40), two M10
Washers (55), two Pulley Bushings (38), and an
M10 Locknut (47).
11
Stop
47
40
40
55
55
55
32
31
31
38
38
38
7
7
10
10.
IMPORTANT: See the CABLE DIAGRAM on
page 19. Cut along the dotted line, and lay
the CABLE DIAGRAM beside this manual for
reference while you assemble the cables and
the pulleys.
Identify the six Pulley Bushings (38) and the
two Spacers (not shown).
Identify the Short Cable (31).
Orient the Short
Cable so that the end with the stop is in the loca-
tion shown.
Route the Short Cable (31) through the Center
Frame (7) as shown.
Insert a Pulley (32) under the Short Cable (31).
Attach the Pulley inside the Center Frame
(7) with an M10 x 55mm Bolt (40), two M10
Washers (55), two Pulley Bushings (38), and an
M10 Locknut (47).
Cable Assembly
38
55
32
47
Summary of Contents for 831.14933.0
Page 20: ...20 NOTES...
