10
11. Insert a Base Stabilizer (9) into the Base (7).
Attach the Base Stabilizer with five M10 x
18mm Screws (36) and five M10 Washers (35).
Attach the other Base Stabilizer (9) to the
Base (7) in the same way.
12. Slide one of the Uprights (11) onto the Base (7).
Attach the Upright with an M8 x 83mm Bolt
(44), an M8 Locknut (31), four M8 x 16mm
Screws (26), and six M8 Curved Washers (33).
Attach the other Upright (11) to the Base (7)
in the same way.
13. Attach the tether on a Weight Rest Pin (13) to
the underside of a Weight Rest (12) with an
ST4.2 x 16mm Screw (17).
Hold the Weight Rest (12)
on the indicated
side
of an Upright (11), and align the Weight
Rest with one of the adjustment holes in the
Upright. Insert the Weight Rest Pin (13) through
the Weight Rest and the Upright.
Attach the other Weight Rest (12) to the
other Upright (11) in the same way. Attach
both Weight Rests at the same height.
14.
Make sure that all parts are properly tight-
ened before you use the weight bench.
11
12
13
9
9
36
36
36
35
35
7
11
33
26
26
7
44
33
33
26
31
11
12
11
13
17
12
11
26
