manualshive.com logo in svg

Weider WESY01190, User Manual

Share
Download
Weider WESY01190 User Manual Download Page 11

19. Using a 3/8Ó x 3 1/2Ó Bolt (16), a 3/8Ó Flat

Washer (9), and a 3/8Ó Nylon Locknut (21),
secure a 3 1/2Ó Pulley (15) and a Cable Trap
(66) to the upper hole in the Press Frame
(17). 

Make sure that the Cable Trap and the

Pulley are oriented as shown.

Hold a 3 1/2Ó Pulley (15) inside the indicated
bracket on the Press Frame (17). Using a 3/8Ó
x 8Ó Bolt (59), two 3/8Ó Flat Washers (9), and
a 3/8Ó Nylon Locknut (21), attach the Pulley to
the Press Frame as shown.

20. Slide a Cable Trap (66) and a 3 1/2Ó Pulley

(15) onto a 3/8Ó x 3 3/4Ó Bolt (71). Insert the
Bolt into the indicated hole in the Front
Upright (42) from the direction shown. Hand
tighten a 3/8Ó Nylon Locknut (21) with a 3/8Ó
Flat Washer (9) onto the Bolt. 

Be sure that

all parts are oriented as shown. Do not
tighten the Nylon Locknut yet.

21. Slide a Cable Trap (66) and a 3 1/2Ó Pulley

(15) onto a 3/8Ó x 3 3/4Ó Bolt (71). Insert the
Bolt into the indicated hole in the Front
Upright (42) from the direction shown. Hand
tighten a 3/8Ó Nylon Locknut (21) with a 3/8Ó
Flat Washer (9) onto the Bolt. 

Be sure that

all parts are oriented as shown. Do not
tighten the Nylon Locknut yet.

21

19

15

15

59

16

21

21

66

17

Bracket

66

42

20

11

71

15

9

9

9

21

66

42

71

15

9

21

CABLE ASSEMBL

Y

Summary of Contents for WESY01190






























Reviews:

No comments

Brands by name

Popular brands

Load more brands