Weider WEBE1486.0, User Manual

Page: 10 / 20

10
7. Apply grease to an M10 x 165mm Bolt (49).
Attach the Backrest Frames (16) to the Frame
(1) with the Bolt, two M10 Washers (52), and
an M10 Locknut (57). Then, set the end of the
Backrest Post (15) in one of the slots (F) in the
Frame.
Do not overtighten the Locknut; the
Backrest Frames must pivot easily.
See step 6. Tighten the M10 Locknut (57) and
the four M6 x 40mm Screws (48). Do not over-
tighten the Locknut; the Backrest Post (15)
must pivot easily.
8. Attach the Weight Tube (24) to the Leg Lever (5)
with an M8 x 70mm Bolt (44), a 13mm x 16mm
Spacer (55), two M8 Washers (54), and an M8
Locknut (58). Then, press a 25mm Outer Cap
(56) onto the Weight Tube.
Next, slide the Olympic Adapter (8) onto the
Weight Tube (24), and tighten the M8 x 10mm
Set Screw (61) in the Olympic Adapter.
Then, apply grease to the barrel of an
M10 x 77mm Bolt Set (45). Attach the Leg Lever
(5) to the Front Leg (4) with the Bolt Set.
Make
sure that the barrel of the Bolt Set is inserted
through both sides of the bracket (G) on the
Front Leg.
7
8
16
1
52
15
F
52
49
57
4
45
45
Grease
G
5
58
54
55
56
54
44
24
61
8
Grease