19
50. Wrap the Ab Cable (107) under a 90mm Pulley
(63). Attach the Pulley, a Cable Trap (68), and
two Half Finger Guards (66) to the Right Base (1)
with an M10 x 48mm Bolt (64) and an M10 Nylon
Locknut (90).
Make sure the Cable Trap and
Finger Guards are oriented as shown.
52. Wrap the Ab Cable (107) under a 90mm Pulley
(63). Attach the Pulley, a Cable Trap (68), and
two Half Finger Covers (66) to the Right Base (1)
with an M10 x 48mm Bolt (64) and an M10 Nylon
Locknut (90).
Make sure the Cable Trap and
Finger Guards are oriented as shown.
54. Wrap the Ab Cable (107) under a 90mm Pulley
(63). Attach the Pulley, a Cable Trap (68) and two
Half Finger Guards (66) to the Right Base (1) with
an M10 x 48mm Bolt (64) and an M10 Nylon
Locknut (90).
Make sure the Cable Trap and
Finger Guards are oriented as shown.
53. Wrap the Ab Cable (107) over a 90mm Pulley
(63). Attach the Pulley, a Cable Trap (68), and
two Half Finger Guards (66) to the lower hole in
the indicated “U”-bracket (50) with an M10 x
48mm Bolt (64) and an M10 Nylon Locknut (90).
Make sure the Cable Trap and Finger Guards
are oriented as shown.
51. Wrap the Ab Cable (107) over a 90mm Pulley
(63). Attach the Pulley, a Cable Trap (68), and
two Half Finger Guards (66) at the second hole
from the bottom of the two Pulley Plates (51) with
an M10 x 48mm Bolt (64) and an M10 Nylon
Locknut (90).
Make sure the Cable Trap and
Finger Guards are oriented as shown.
50
51
52
53
54
90
66
107
66
64
68
63
1
90
51
68
63
107
66
66
64
63
1
66
66
90
68
64
107
107
107
64
66
66
50
68
63
63
68
66
66
1
90
64
90
