8
8
5. Orient one of the Pull-up Frames (3) as shown,
and insert it into one of the Uprights (2).
Attach the Pull-up Frame with two M8 x 68mm
Bolts (24), two M8 Washers (23), and two
M8 Locknuts (22).
Note: The Bolts must be
inserted into the lowest set of holes in the
Pull-up Frame and the Upright. Make sure
that the bolt heads are in the hexagonal holes
in the Upright. Do not tighten the Locknuts
yet.
Attach the other Pull-up Frame (3) to the
other Upright (2) in the same way.
3
3
2
5
2
22
23
23
24
4. Attach a Footrest Frame (4) to one of the Bases
(1) with the two indicated M8 x 68mm Carriage
Bolts (20) and two M8 Locknuts (22);
do not
tighten the Locknuts yet.
Next, attach the Footrest Frame (4) to the
Upright (2) with two M8 x 75mm Bolts (17), two
M8 Washers (23), and two M8 Locknuts (22);
do
not tighten the Locknuts yet.
Attach the other Footrest Frame (4) to the
other Base (1) and the other Upright (2) in the
same way.
4
1
1
22
22
20
17
23
23
22
22
2
4
2
4
Meijer.com
Summary of Contents for Power Tower WEBE99712.0
Page 13: ...13 13 NOTES Meijer com ...
