manualshive.com logo in svg

Weider PLATINUM 831.153970, User Manual, Page: 13 / 28

Share
Download
Weider PLATINUM 831.153970 User Manual Download Page 13

13

26. Press two 19mm Round Inner Caps (51) into a

Pad Tube (50). Slide the Pad Tube into the Leg
(5). Slide two Large Foam Pads (52) onto the
Pad Tube. 

Attach the other Pad Tube (50) to the Leg
Lever (56) in the same manner.

28. Wrap a High Cable (101) over a 90mm Pulley

(40). Attach the Pulley to a Pulley Housing (39)
with an M10 x 44mm Button Bolt (125) and an
M10 Nylon Locknut (103).

Repeat this step with the other High Cable
(101) and Pulley Housing (39).

29.

Make sure that all parts have been properly tight-
ened. The use of the remaining parts will be
explained in ADJUSTMENTS, beginning on the
following page. 

Before using the resistance system, turn on
the console and change the resistance setting
as described in CONSOLE OPERATION on
page 18. Refer to TROUBLESHOOTING on
page 21 and adjust the Crossbar Cable ten-
sion as described.

27. Attach a 90mm Pulley (40) inside of the Leg (5)

with an M10 x 85mm Button Bolt (127), two M10
Washers (106), two 22mm Spacers (61), and an
M10 Nylon Locknut (103).

26

27

52

52

56

51

5 50

50

51

40

5

61

61

106

106

127

103

28

103

39

40

125

101

Summary of Contents for PLATINUM 831.153970





























Reviews:

No comments