3. Raise the Backrest (1) to the desired position and
hold it. Secure the Backrest by inserting the
Backrest Pin (16) completely through the desired
holes in the Backrest Frames (4, 5) and the welded
tube in the Bench Frame (17).
5
4. Tap an Axle Cap (22) onto one end of the Axle (20).
Next, slide a Wheel (21) onto the Axle.
Insert the Axle (20) through the Support Leg (24).
Slide the other Wheel (21) onto the Axle (20) and
tap the other Axle Cap (22) onto the end of the Axle.
3
4
5
4
24
22
21
20
21
22
17
16
1
6.
Make sure all parts are properly tightened
before you use the weight bench.
5. Press Stabilizer Outer Caps (10) onto the ends of
the stabilizer on the Dumbbell Rack (19).
Attach the Support Leg (24) to the Dumbbell Rack
(19) with the M10 x 95mm Bolt (13) and an M10
Nylon Locknut (8).
24
13
19
10
8
5