7
8.
Attach the Leg Lever Bumper (55) to the Front
Leg (6) with an M4 x 19mm Screw (77).
Press two 45mm Square Inner Caps (42) into the
Leg Lever (7).
Lubricate an M10 x 68mm Button Head Bolt (56)
with grease. Orient the Leg Lever (7) with the slot
on the side shown. Attach the Leg Lever to the
Front Leg (6) with the Bolt and an M10 Nylon
Locknut (76).
Do not overtighten the Nylon
Locknut; the Leg Lever must be able to pivot
easily.
8
56
76
6
7
42
77
55
42
Lubricate
Slot
6.
Attach the Lat Tower (4) to the Upright (3) with
four M10 x 25mm Button Head Bolts (87), and
four M10 Lock Washers (103).
Attach the Name Plate (89) to the Lat Tower (4)
with two M4 x 16mm Screws (62).
6
4
3
89
62
62
87
87
103
103
7.
Press a 38mm Round Inner Cap (38) into each
end of the Lat Tower Crossbar (10).
Attach two Eyebolts (34) to the Lat Tower
Crossbar (10) with two M8 Washers (59) and two
M8 Nylon Locknuts (65).
Do not overtighten the
Locknuts; the Eyebolts must be able to rotate
freely
.
Attach the Lat Tower Crossbar (10) to the Lat
Tower (4) with two M10 x 65mm Button Head
Bolts (70), two M10 Washers (75), and the
Crossbar Cover (93).
Be sure that the Eyebolts
(34) are oriented as shown in the inset draw-
ing. If they are not, turn the Lat Tower
Crossbar around and reattach it.
7
38
65
65
10
34
59
34
70
59
93
75
4
38
34
10
4
Side View
