7
3. Attach the Seat (18) and the Seat Bracket (38)
to the Frame (1) with two M6 x 80mm Screws
(48) and two M6 Washers (32).
3
4. Attach the Front Leg (4) to the Frame (1) with
two M10 x 85mm Bolts (44), two M10 Washers
(55), and an M10 Locknut (42).
See steps 1 and 2.
Tighten the M10 Locknuts
(42).
4
1
1
4
42
44
55
18
38
48
48
32
32
2. Orient the Rear Stabilizer (3) so that the square
holes are on the side shown. Attach the Rear
Stabilizer to the Frame (1) with two M10 x
90mm Carriage Bolts (43) and two M10
Locknuts (42).
Do not tighten the Locknuts
yet.
2
1
42
3
43
42
Square
Holes
