38. Attach the Rear Cable (87) to the Leg Lever
(15) with a 5/16” x 3” Bolt (92), a 5/16”
Washer (20), a 5/8” x 9/16” Bushing (61) and
a 5/16” Nylon Locknut (40).
39. Find the Low Cable (89)—this is the short-
est of the two remaining Cables. Feed the
Low Cable under the 3 1/2” Pro Pulley (97)
and the row tube on the Pulley Base (79).
The ball on the Cable must be on the side
shown. Tighten the 3/8” x 2” Bolt (50) and
3/8” Nylon Locknut (not shown).
40. Wrap the Low Cable (89) around a “V” Pulley
(81). Slide the “V” Pulley and a Large Cable
Trap (83) onto the 3/8” x 4” Carriage Bolt (57)
in the Weight Base (14). Tighten a 3/8” Nylon
Locknut (42) onto the Carriage Bolt.
41. Wrap the Low Cable (89) around a 3 1/2”
Pulley (82). Attach the Pulley to the bracket
on the Weight Base (14) with a 3/8” x 2” Bolt
(50) and a 3/8” Nylon Locknut (42).
41
38
39
40
18
CABLE
ASSEMBL
Y
87
92
40
61
15
20
89
89
97
Row Tube
50
79
Ball
14
57
83
81
42
89
50
14
42
82
