SERVICE: Qty Required=1
ART No.L0106070
ENGINE: Qty Required=1
PART No.L0106040
NOTE:
For engine safety and instruction decals, see engine owner's manual or contact the engine supplier.
Below are the decals available for re-ordering to facilitate maintenance.
All decals are available for replacement except that with the serial number of the unit for each number serves as an
unique identifier for warranty and support purposes.
If you have any questions, please do not hesitate to contact WEIBANG'S local dealer or WEIBANG's exclusive national
distributor for further assistance.
SECURE NOZZLE: Qty Required=1
PART No.XYJLP010
LABEL SPARK ARRESTER: Qty Required=1
PART No.XYJLP020
OPERATOR: Qty Required=1
PART No.L0106060
OPERATOR: Qty Required=1
PART No.XYJLP080
OPERATOR: Qty Required=1
PART No.XYJLP070
OPERATOR: Qty Required=1
PART No.XYJLP050
HAND: Qty Required=1
PART No.L0202010
4
INSTRUCTION LABELS CONT D...
,
Safety and instruction decals are located on the vacuum frame and engine. Replace any decal that is damaged or
unreadable,
replace them before operating this equipment,call dealer for information on decals.
For location of safety decals on the vacuum frame, see parts drawings and lists provided for convenience in ordering
replacement labels.
3
7. Use extra care in handling fuels. They are flammable and vapours are explosive.
Use only an approved container.
Never remove fuel cap or add fuel with the engine running. Allow engine to cool before refueling.
Do not smoke.
Never refuel the machine indoors.
Never store the machine or fuel container inside where there is an open flame, such as a water heater.
If fuel is spilled, do not attempt to start the engine, but move the machine away from the area of spillage before starting.
Always replace and securely tighten fuel cap after refueling.
Your machine is equipped with a safety device which prevents the engine start when the vacuum house is not in place.
In operation, the removal of the hose stops the engine.Never use a machine with defective guards or safety devices off.
Regularly check the proper functioning of safety devices.
RESPONSIBILITY OF THE OPERATOR
The operator must be one close to the vacuum cleaner during operation.
Responsibility of the user is bound towards third parties:
- In the working area of the machine,
- In the case of using non-original parts when replacing parts used,
- In the case of using a modified machine or poorly maintained,
- If the work to be performed outside the normal course of use.
SAFETY DEVICE
SAVE THESE INSTRUCTIONS!!
INSTRUCTION LABELS
SAFETY PRECAUTIONS CONT D...
,
SPECIFICATIONS
Engine Make/ Model
Engine Fuel Capacity
Engine Oil Capacity
Total Unit Empty Weight:
Max operating slope
Overall HxWxL
3.6kW \3600min-1
HONDA GX160
1.57x0.87x1.0m
LONCIN G160F
3.6L
0.6L
80kgs
80kgs
83kgs
8.5
97.4 dB(A),K=3dB(A)
104.8 dB(A),K=3dB(A)
2
4.66 m/s ,K=1.5m/s
Model
WBLV506H WBLV506H V
WBLV506C WBLV506C V
Working width
80cm
Collection bag (L)
240L
Hand-Arm Vibration
Drive speed m/s
0.75-0.86-1.1
0.75-0.86-1.1
Rated power, kW
82.5kgs
Sound noise declaration Lwa
Sound pressure level at operator's
ear Lpa
86kgs
94.7 dB(A),K=3dB(A)
0.9
0.9
93.7 dB(A),K=3dB(A)
2
2
3.93 m/s ,K=1.5m/s
2