19
ATTENTION! Because of the combined weight of the pool, water and users, it is extremely
important that the base where the pool is installed is smooth, flat, level and capable of uni-
formly supporting this weight for the entire time the pool is installed. If the pool is placed on a
surface, which does not meet these requirements, any damage caused by improper support
will void the guarantee.
a) Indoors installation
Be aware of special requirements if you install the pool indoors:
1. The floor must be able to withstand the capacity of the pool. The floor should be a non-
slip, level surface
2. Proper drainage is essential for indoor pool installation. When building a new room for the
pool it is recommended that a floor drain be installed.
3. Humidity is naturally side effect with pool installation. Determine the effects of air-
borne moisture on exposed wood, paper, etc. in the proposed location. To mini-
mize these effects it is best to provide plenty of ventilation to the selected area.
Note: Do not install the pool on carpet or other material that can be damaged by mois-
ture.
b) Outdoors installation
Be aware of special requirements if you install the pool outdoors:
1. No matter where you install the pool, it is important you have a solid support foundation.
If you are installing the pool outdoors, ensure there are no sharp objects that could dam-
age it and that the location is level so the pool sits stably and properly.
2. During filling, emptying or when in use, water may spill out of the pool. Therefore, the pool
should be installed near a ground drain.
3. Do not leave the pool’s surface exposed to direct sunlight for long periods of time.
c) Assembly
1. Unfold the pool from the packaging. Spread the pool and cover. Make sure both are
right side up.
