Transport rack for kitchen tops
Page: 4 of 8
File: D:\\Eigene Dateien\Bedienungsanleitungen\Transportgestell für Küchenarbeitsplatten.doc
Version / Erstellt am:
2 / 29.09.2003
•
The kitchen tops have to be parallel to the support. Putting the kitchen tops in the transport rack for kitchen tops beveled
is not appropriate!
•
When transporting kitchen tops on a truck using the transport rack for kitchen tops the kitchen tops have to be fixed
additionally that they won’t topple over using straps according to the regulations for the prevention of accidents!
•
The truck and the road have to provide a suitable lifting capacity!
•
The way on which the transport rack for kitchen tops is transported or pulled has to be even and horizontal!
•
Within the transport rack for kitchen tops the kitchen tops have to be moved carefully!
•
Staying under hovering loads is forbidden
•
Keep your working area clean and take care of good illumination!
•
When using the transport rack for kitchen tops always wear appropriate safety clothing according to the regulations for
the prevention of accidents, such as:
•
Working gloves and clothing according to the regulations fort he prevention of accidents!
•
Safety shoes according to the regulations for the prevention of accidents!
•
Use work pieces exclusively appropriate to the machine like stone slabs without any cracks!
•
Take care that no one’s near the tool while you are working with it to exclude an endangerment of anyone else.
•
Check whether all parts are assembled correctly!
•
If there is damage to the tool or any other malfunction get immediately into contact with the trading or producing
company!
•
Protect the machine against the weather, e.g. rain, sun, humidity and etc.!
•
In case of irreparable damage or other reasons, which prevent the long-term use of the machine, stop its operation, by
making the machine unusable thus making sure that there’s no danger to other people!
•
If disposing of the machine or parts thereof, dismantle and separate the different materials, which can then be disposed of
to be recycled!
4.4 Machine identification plate
The identification plate informs about the origin, identity as well as year of
construction and, if necessary, about the maximum carrying capacity.
By the supply please compare the identification plate with the data on the
first side of the operating instructions. If the data differ from each other,
please contact immediately the dealer or the manufacturer.
4.5 Technical and structural data
Height [cm]
146 cm
Maximum lifting capacity per
side [kilos]
Each side maximum 750 kilos.
Width [cm]
200 cm
Net weight [kilos]
140 kilos
Length [cm]
110 cm
Screen support [cm]
1 cm
5 Assembly
Please read the information in this chapter very carefully and adhere most strictly to them. The producer or the WEHA-Ludwig Werwein
GmbH are not responsible for damages caused by not taking care of these instructions.
5.1 Scope of supply
Before assembling check whether the scope of supply is complete.
If that’s not the case get immediately into contact with the producer or the trader.
Included in the scope of supply are:
•
1 x instruction manual
•
1 x transport rack for kitchen tops including:
•
1 x basic frame including six screwed hexagon nuts M12 including clamping device (plastic insert)
•
1 x A-support
•
8 x strapping staff including lashing strap
•
1 x wheel including pole (optionally)
5.2 Instructions for the assembly
The transport rack for kitchen tops is delivered unassembled to you.
So you have to assemble it yourself.
To assemble the transport rack for kitchen tops you need a open-end wrench SW 19.
