ISO
zertifizie rt
Vacuum lifter EP 800 / 600 / 400 / 300 / 150 - Operating instructions
File:
D:\\Bedienungsanleitungen\Englisch\Vakuumheber EP 800 600 400 300 150
Revision/ Erstellt am:
4/ 12.10.2001
Page: 8 of 11
6.3 Operating the additional assembly groups (optional)
6.3.1 Vacuum lifter EP with remote-control device
For the additional safety regulations see paragraph 4.3.
Attention danger!
Take care that the remote-control device can not be accidentally released!
Attention danger!
Ensure that no strong electro-magnetic fields are in the proximity, e.g. mobile phones, electrified rails,
power lines or similar!
•
The vacuum lifter EP with remote-control device should not be used near strong electro-magnetic fields. Do not keep in close
proximity or do not use any mobile phone whilst in operation.
Picture 6.3
– Remote-control device
•
You can operate the hand slide valve by means of
remote-control device, comprising the receiver [A3],
the remote-control device [B3] and the control valve
[C3].
•
Before putting into operation make sure that the 9V-
Block-Battery of the remote-control device has
enough power.
Picture 6.4
- Remote-control device
•
Instead of the instruction „Turn the blue ring of the
hand slide valve [A2] to the right [Picture 6.2]“
[Paragraph 6.2] push the gray button [B4] of the
remote-control device [A4].
•
The remote-control device [A4] must show with the
front side (the side with the red warning light [D4]) to
the receiver [E4]. If the remote-control device [A4] is
used in the right way, both red warning devices [D4]
light.
•
Now you must operate the pneumatic cylinder again,
as explained in paragraph 6.2 from point 8.
•
After setting down and securing the stone slab,
press the red button [C4] of the remote-control
device. The vacuum chamber will be now
ventilated and the vacuum safety tank retain the
vacuum.
B3
C3
A3
C4
D4
A4
B4
E4
Summary of Contents for EP 150
Page 12: ......
