8�3
Disconnection
Î
After the end of the testing procedure, fully vent the media
line.
Caution:
First depressurize the system before releasing
the connection.
Î
Grip the connector by its sliding sleeve (Pos. 1).
Î
Pull the sliding sleeve (Pos. 1) back (
Figure 5
). The
connection to the test piece is released and the connector
can be removed by pulling it straight back.
Attention:
In the event that you cannot remove the
connector from the test piece:
- Wait a few moments
- Never use excessive force
- Do not use any tools (e.g. hammer)
Figure 5
MD-10063-L51-R1.1.0-03
Page 18
Operating instructions
AE
