Wegener DVR395, Installation Manual

Page: 20 / 30

Page 20
DVR395/DVR396-002 Page 20 of 30
Table 6. LED Indications
Mode Condition Status LED
Power Up IRD is in process of powering up RED/GREEN Blink Pattern
Boot Fail EEPROM Boot Failure RED
Receiver Board Diagnostics Failure RED
Receiver Board Communications Failure RED
Secure micro / Host ID mismatch RED
Alarm Receiver Board Run-Time Failure RED Blink w/ Count = 1
In Fade Mode > 5 seconds (See Warnings Below.) RED Blink w/ Count = 2
Installation Mode > 5 seconds (See Warnings
Below.) RED Blink w/ Count = 3
Carrier Table Search Mode RED Blink w/ Count = 4
Header Search Mode RED Blink w/ Count = 5
Satellite Search Mode RED Blink w/ Count = 6
Alarming Eb/No (and locked on carrier) (See
Warnings Below.) RED Blink w/ Count = 7
No MPEG Data > 5 seconds (but locked on carrier)
(See Warnings Below.) RED Blink w/ Count = 8
No Video Data > 5 seconds (but have MPEG data)
(See Warnings Below.) RED Blink w/ Count = 9
NTSC - PAL mismatch. RED Blink w/ Count = 10
No Audio Program Table RED Blink w/ Count = 11
Warning Secure Micro Routine Failure AMBER Blink w/ Count = 1
Marginal Eb/No (and locked on carrier) AMBER Blink w/ Count = 2
COMPEL Required and No COMPEL within last 2
minutes AMBER Blink w/ Count = 3
Audio Free Running AMBER Blink w/ Count = 4
No MPEG data < 5 seconds AMBER
No Video Data < 5 seconds AMBER
Fade or Installation Mode < 5 seconds AMBER
Normal Normal Mode for a COMPEL-not-Required Unit GREEN
COMPEL addressed within last 5 seconds GREEN Flutter
COMPEL addressed within last 2 minutes GREEN