14
of
76
TECHNICIANS manual
2.6.13 Cup heater
The cup heating device is for heating cups before
they are used.
To activate the cup heater, press the button
.
The ignition of the cup warmer is indicated by the
color red of the button.
To adjust the temperature of the cup heater see paragraph "8.4
Services tuning" on page 31.
2.6.14 Cappuccino maker (optional)
The cappuccino maker can be optionally installed
on the steam nozzle or directly on the tap. This device
allows to both heat and foam the milk. For adjusting
and cleaning, follow the provisions in the user's manual.
Apply the cappuccino maker, using the appropriate
fitting, directly to the steam spout, by replacing the origi-
nal sprayer, or through the appropriate hose, directly to
the steam knob of the machine.
Ensure that seal (
1
) is present and/or use Teflon tape
in order to avoid steam loss which may compromise the
cappuccino maker's operation.
Insert the milk drawing hose (
3
) into the appropriate
connection (
2
) of the cappuccino maker.
To change the temperature of the milk apply the
adaptors as shown in the table below.
1
3
2
table of temperatures with and without reductions
(temperatures measured in a pre-heated cup)
Milk temperature
Without use of
adaptor
With WHITE
adaptor
Ø 1,9mm
With RED
adaptor
Ø 1,8mm
Room temperature
16°C
55 - 60 °C
60 - 68 °C
68 - 75 °C
Chilled milk 6°C
48 - 56 °C
58 - 63 °C
63 - 70 °C
