www.weg.net
22 | WECM / Emerald eZA Manual
EU DECLARATION OF CONFORMITY
Manufacturers:
Changzhou Yatong Jiewei Electromotor Co.,LTD
No.118, Dongdu West Road, Luoyang Town, Wujin,
Changzhou, Jiangsu, China.
www.weg.net/cn
WEG (Chang Zhou) Automation Equipment Co.,Ltd
No.2226, South Second Ring East Road, Jintan District,
Changzhou City, Jiangsu Province, China
www.weg.net/cn
WEGeuro – Industria Electrica S.A.
Headquarters:
Rua Eng Frederico Ulrich, Apartado 6074
4476-908 – Maia – Porto – Portugal
www.weg.net/pt
Contact person: Luís Filipe Oliveira Silva Castro Araújo
Authorised Representative in the European Union
(Single Contact Point)
The manufacturer declares under sole responsibility that:
WEG electric motors and components used for following motor lines:
WECM – WEG Electronically Commutated Motor
BLDC – Permanent Magnetic Synchronous Motor (Al)
when installed, maintained and used in applications for which they were designed, and in compliance with the relevant
installation standards and manufacturer’s instructions, comply with the provisions of –––-the following relevant European
Union harmonization legislation, wherever applicable:
Low Voltage Directive 2014/35/EU
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU and its amendments (Including Directive 2015/863/EU)
The fulfilment of the safety objectives of the relevant European Union harmonisation legislation has been demonstrated by
compliance with the following standards, wherever applicable:
EN 60034-2-1: 2014 / EN 60034-1: 2010 / EN IEC 60034-5: 2020 / EN IEC 60034-6: 1993 / IEC 60034-7: 2020 / EN
60034-8: 2007/A1: 2014 / EN 60034-9: 2005/A1: 2007 / EN IEC 60034-14: 2018 / CLC/TS 60034-25: 2008 / CLC
IEC/TS 60034-30-2: 2021 / EN IEC 63000: 2018 / EN IEC 61800-3: 2018 / EN 60204-1: 2018 / WECM and BLDC:
EN 61800-5-1: 2007/A1:2017/A11:2021
Signed for and on behalf of the manufacturer
Rogerio Aguiar Rodrigues
Managing Director
Changzhou, May 10, 2022
