VIEW "X"
VIEW "X"
MOVEMENT
DIRECTION
C
D
A
A
B
B
1
2
III - COMMUNICATION KIT INSTALLATION
For installing the communication kit proceed according to the following steps:
English
Step 1:
Disconnect all the cables and connectors from the front, top and bottom
parts of the control module (A).
Step 2:
Detach the control module from the power module (B) - Loose the screws
indicated in the figure, and detach the modules performing two movements (see
the arrows).
Step 3:
Disconnect the cables that interconnect the control module to the power
module.
Step 4:
Remove the keypad from the control
module (C) by pulling it (hold the module by
its sides).
Step 5:
Remove the plastic cover (D).
Detach the fasteners around the control
module and pull to remove the plastic cover.
Extract the X9 connector protection from the
removed plastic cover.
02
