WEG PSRW, User Manual

Page: 51 / 59

Programming With WPS
PSRW | 9-17
9
„
Check if the device is connected. If it is, the icon “plug” will be activated: .
„
Check if the button “Monitor and read from equipment” is activated: . If not, click on it to activate. On
this moment the message bellow will be displayed, but actually nothing will change on the configurations made.
By this way, just ignore the message and click on “Yes”.
„
Transfer the configuration by clicking on .
„
On this moment, a Progress Bar will be displayed to inform the status of the transferring process.
„
If no error occur the Progress Bar will hide, and a popup will be displayed informing that now is necessary to
validate the configurations.
„
Also, a text “Validation pending” will be displayed where the Progress Bar was. When the configurations were
validated on wizard Monitor, this text changes to “Validation OK”.
Validation pending