Safety Instructions
4 | CPW22
E
ng
lis
h
1 SAFETY INSTRUCTIONS
The alert symbols shown below indicates potential hazard, risk or recommendation. If not follow the alerts may
cause dangerous situations to user or process.
DANGER!
Failure to comply with safety regulations can result in death, serious injury and / or serious damage.
Installation and commissioning of the device must be performed only by qualified and authorized
personnel.
The electrical connection of the device can only be made with the device isolated.
ATTENTION!
The general concept of the control system in which the device is incorporated must be validated by
the user.
The electrical connection of the device must comply with the instructions contained in this user
manual; otherwise, there is a risk that the safety function will be lost.
It is not allowed open the device, adulterate it or ignore security devices.
NOTE!
Observe regulations of the country when transporting, installing and disposing of the device.
All relevant safety rules and standards must be observed.
1.1 APPLICABLE STANDARDS
CPW22 complies with the following european directives and international standards:
Table 1.1:
Applicable standards
European Directives
2006 / 42 / EC
Machinery directive
2011 / 65 / EU
+ 2015 / 863
RoHS directive
International Standards
EN ISO 13849-1
: 2015
Safety of machinery – safety-related parts of control systems
IEC 62061
: 2005
+ AC:2010 + A1: 2013 + A2: 2015
Safety of machinery – functional safety of safety-related electrical, electronic and programmable
electronic control systems
IEC 60947-5-1
: 2003 + A1: 2009
Low-voltage switchgear and control gear
Control circuit devices and switching elements
Electromechanical control circuit devices
IEC 61508 Parts 1-7
: 2010
Functional safety of electrical / electronic / programmable electronic safety-related systems
EN IEC 63000
: 2018
Technical documentation for the assessment of electrical and electronic products with respect
to the restriction of hazardous substances
