3
7. Answer a call: Just press the button once on one of the two headsets to answer a call.
8. Dial the last number
When you are connected to your phone, simply press the button on the left atrium (L) twice to call the last
person on the phone.
Caution: This action does not work if you already have an audio track playing on your headphones.
9. Deny a call
To reject a call, press and hold the button on one of the two earphones for about 2sec.
10. End a call
Press the button on one of the two earphones during your phone call to end it.
11. Automatic connection
Once your headsets paired with your smartphone or tablet, the connection between them will be
automatically from the ignition. An audible message warns you when your headset is connected.
Check that Bluetooth is enabled on the phone or tablet.
If the automatic connection is not made, reconnect your earphones by following steps 3 & 4.
12. Battery level
When the earphone battery level is below 20%, a red light will flash on your earphones.
13. Connecting with a single headset
It is possible to use only one of the two headsets, the pairing procedure is identical, the headset that is not
used can then remain supported in the case.
•
Cleaning
Never open the product to clean it, or the warranty will void. Make sure the product is turned off before
cleaning. Clean the outside of the product with a soft, dry cloth. Silicone tips can be removed for cleaning.
•
Troubleshooting
Refer all servicing to qualified personnel. Troubleshooting is required if the unit has been damaged in any way:
damaged plug or power cord, spilled liquid on the product, introduction of small objects into the product,
exposure to moisture, malfunction, fall of the product ...
•
Security - Environment
Your product has been tested in the laboratory, it complies with the European directives corresponding to the
CE marking in force at the time of its commercialization.
A traceability of the components of your product has been realized, it has shown us the conformity of the
product with the environmental directive (ROHS) in force at the time of its commercialization.
At the end of its life, do not dispose of the product in the trash, but deposit it in the dump, which will take the
product through an electrical, electromechanical and electronic waste (WEEE) recycling system.
