10
JUMP STARTING YOUR ENGINE
1.
Ensure your engine is completely OFF.
2.
Securely connect the
Smarty Clamps
®
to your Weego 44, then power ON.
3.
Attach
BLACK
clamp to your battery’s negative
(-)
terminal, then the
RED
clamp
to your battery’s positive
(+)
terminal. Adjust your
Smarty Clamps
®
to achieve
MAXIMUM contact with the terminals. Poor connections will prevent you from
starting your engine!
Clear off any dirt or build-up with a wire brush or a dry towel
before connecting your clamps.
4.
Place your Weego 44 in a secure location or suspend using the provided hook &
lanyard so it won’t fall. Check your
Smarty Clamps
®
lights.
5.
When you have a
FLASHING GREEN
READY
light, start your engine.
If the engine
doesn’t start, turn off your vehicle and check your
Smarty Clamps
®
lights.
6.
After a successful start, quickly disconnect the
Smarty Clamps
®
from your
Weego 44.
7.
Detach the
Smarty Clamps
®
from the battery.
8.
You’re now good to go - be sure to run your engine for at least 15 minutes before
shutting it off again so it has time to recharge your battery.
If you are having issues getting your engine started, see the
Troubleshooting
section on page 12 or visit myweego.com/support for further details
and assistance.
WARNING!
Exposed Metal Jaws May Be HOT After Use!