Steps:
1. Place ELF Mainboard in position (see diagram)
2. Lock 4 x Screw M4*6 in turn.
3.
Follow Step 8, wiring. First step wire TT Motor, second step wire other
sensors.
4. Check wires and make it tidy. Switch on your WeeeBot and test all
functions.
Assemble WeeeBot
Install ELF Mainboard
Tips
1. If your WeeeBot do not follow the direction on
your program or remote control, please follow Step
8, check wiring on port M1 and M2.
2. If your WeeeBot do not follow the Line-following
commend or avoid obstacle commend, please
follow Step 8, check wiring of sensors.
4X Screw M4*6
1X ELF Mainboard
Tip:
The left of the diagram is
M1 motor, the right of the
diagram is M2 motor.
Tip: Port ABCD should face
toward car front.
Left side panel installation diagram
(Right side panel is the same)
Congratulations, WeeeBot is fully assembled!
