background image

2

SAFETY RULES

WARNING:

When using gardening

appliances, basic safety precautions should

always be followed to reduce the risk of fire

and serious injury. Read and follow all instruc-

tions. Failure to do so can result in serious in-

jury.

DANGER

:

This power tool can be dan-

gerous!

This unit can cause serious injury in-

cluding amputation or blindness to the opera-

tor and others. The warnings and safety

instructions in this manual must be followed to

provide reasonable safety and efficiency in

using the unit. The operator is responsible for

following the warnings and instructions in this

manual and on the unit. Read the entire Op-

erator’s Manual before assembling and using

the unit! Restrict the use of this unit to persons

who read, understand, and follow the warn-

ings and instructions in this manual and on the

unit. Never allow children to operate this unit.

SAFETY INFORMATION

ON THE UNIT

OPERATORS

MANUAL

DANGER:

Blade can thrust violently

away from material it does not cut. Blade

thrust can cause amputation of arms or legs.

Keep people and animals 50 feet (15 meters)

away.

WARNING:

Trimmer line can throw

objects violently. You can be blinded or in-

jured. Wear eye and leg protection.

Leg Guards

Boots

Eye

Protection

ALWAYS WEAR:

Thrown

Objects

WARNING:

Hazard zone for thrown

objects. Blade/Trimmer line can throw objects

violently. Others can be blinded or injured.

Keep people and animals 50 feet (15 meters)

away.

Hazard Zone

50 Feet

(15 Meters)

WARNING:

Do not use trimmer head

as a fastening device for the blade.

WARNING:

The blade continues to

spin after the throttle is released or, engine is

turned off. The coasting blade can throw objects

or seriously cut you if accidentally touched. Stop

the blade by contacting the left hand side of the

coasting blade with material already cut.

Stop coasting blade by

contact with cut material.

OPERATOR SAFETY

S

Dress properly. Always wear safety glasses

or similar eye protection when operating, or

performing maintenance on your unit.

(Safety glasses are available.) Eye protec-

tion should meet the requirements of ANSI

Z87.1 and be marked Z87.

S

Always wear face or dust mask if operation

is dusty.

S

Always wear heavy, long pants, long

sleeves, boots, and gloves. Wearing safety

leg guards is recommended.

S

Always wear foot protection. Do not go

barefoot or wear sandals.

S

Secure hair above shoulder length. Secure or

remove loose clothing and jewelry or clothing

with loosely hanging ties, straps, tassels, etc.

They can be caught in moving parts.

S

Being fully covered also helps protect you

from debris and pieces of toxic plants

thrown by spinning line/blade.

S

Stay Alert. Do not operate unit when you are

tired, ill, or under influence of alcohol, drugs, or

medication. Watch what you are doing; use

common sense.

S

Wear hearing protection.

S

Never start or run the engine inside a closed

room or building. Breathing exhaust fumes

can kill.

S

Keep handles free of oil and fuel.

Summary of Contents for 530088776













Reviews: