16
MAINTENANCE
BEFORE EACH USE
T
R
A
C
T
0
R
Adjust Motion Drive Belt(s) Tension
Inspect Muffler/Spark Arrester
Lubrication Chart
Check Brake Operation
Clean Air Filter
Change Engine Oil
Replace Air Filter Paper Cartridge
Replace Spark Plug
Check Battery Level
Check Tire Pressure
Clean Battery and Terminals
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE
MAINTENANCE SCHEDULE
EVERY 8 HOURS
EVERY 25 HOURS
EVERY 50 HOURS
EVERY 100 HOURS
EVERY SEASON
SERVICE DATES
Check for Loose Fasteners
BEFORE STORAGE
Check Engine Oil Level
Clean Engine Cooling Fins
Sharpen/Replace Mower Blades
Check Operator Presence and
Interlock Systems
Clean Air Screen
1 - Change more often when operating under a heavy load or in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
3 - If equipped with oil filter, change oil every 50 hours.
4 - Replace blades more often when mowing in sandy soil.
E
N
G
I
N
E
Replace Oil Filter (If equipped)
Check Transaxle Cooling
Adjust Blade Belt(s) Tension
Replace Fuel Filter
1
4
2
2
2
2
5 - If equipped with adjustable system.
6 - Not required if equipped with maintenance-free battery.
7 - Tighten front axle pivot bolt to 35 ft.-lbs. maximum.
Do not overtighten.
1
,
1 2,3
,
2
5
5
6
7
LUBRICATION CHART
➀
Spindle
Zerk
➀
Front Wheel
Bearing
Zerk
➀
SAE OR 10W30 MOTOR OIL
➁
REFER TO
MAINTENANCE “ENGINE”
SECTION
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubricant
sparingly.
➀
Front Wheel
Bearing Zerk
➁
Engine
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To
receive full value from the warranty,
operator must maintain tractor as
instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual
should be checked at least once each
season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and
help your engine run better and last
longer.
BEFORE EACH USE
• Check engine oil level.
• Check brake operation.
• Check tire pressure.
• Check operator presence and
interlock systems for proper operation.
• Check for loose fasteners.
➀
Spindle
Zerk
33
TRACTOR -- MODEL NUMBER 259723
CHASSIS AND ENCLOSURES
NOTE: All component dimensions given in U. S.
inches 1 inch = 25/4 mm
KEY
PART
NO.
NO.
DESCRIPTION
1
169831
Chassis Lt Stamping
2
169061
Drawbar
3
17060612
Screw 3/8-16 x 3/4
5
155272
Bumper Hood/Dash
6
155924X012
Saddle SLKSCRE FLT SDL
8
155138
Clip Retainer Slide-on
9
168347X011
Dash Slkscr Plm Mech Sym
10
72140608
Bolt RdHd Sqnk. 3/8-16 x 1
11
155927
Panel Asm. Dash Lh
12
145660
Clip Tinnerman Grille P/L
13
172107X010
Panel Dash Rh
15
74180512
Screw Mach Trhd 5/16-18unc x 3/4
16
73510500
Nu Keps 5/16-18unc
17
159639X550
Hood Pnt Steel Private Label
18
126938X
Bumper Hood
24
74780616
Bolt Fin Hex 3/8-16 Unc x 1 Gr. 5
25
19131312
Washer 13/32 x 13/16 x 12 Ga.
26
73800600
Nut Lock Hex w/Ins 3/8-16 Unc
28
157373
Grill Private Lable Blk
29
140273X599
Lens Grille Private label
30
169465X550
Fender Pnt
31
136619
Bracket Fender Support
33
145476X550
Footrest Pnt. Lh
34
145475X550
Footrest Pnt. Rh
35
72110606
Bolt RdHd Sht. Sqnk. 3/8-16 x 3/4
37
17490508
Screw Thdrol 5/16-18 x 1/2 Tyt
38
169834
Bracket Asm. Pivot Mower Rear
51
73800400
Nut Lock Hex W/Ins. 1/4-20
52
19091416
Washer 9/32 x 7/8 x 16 Ga.
53
144697
Bracket Grille LH
54
161464
Screw Hex Wshd #8-18 x 7/8
55
144696
Bracket, Grille RH
57
74780412
Bolt Fin Hex 1/4-20 x 3/4
145
156524
Rod Pivot Chassis /Hood
206
170165
Bolt Shoulder 5/16-18 TT
208
17670608
Screw Thdrol 3/8-16 x 1/2
209
17000612
Screw Hex Wsh Thdrol 3/8-16 BL
- -
5479J
Plug Button Blk .359 Dia. Choke
