background image

11

KNOW YOUR TRACTOR

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR TRACTOR
Compare the illustrations with your tractor to familiarize yourself with the locations of
various controls and adjustments.  Save this manual for future reference.

Our tractors conform to the safety standards of the American National Standards

Institute.

ATTACHMENT CLUTCH LEVER - Used
to engage the mower blades, or other
attachments mounted to your tractor.
ATTACHMENT LIFT LEVER - Used to
raise, lower, and adjust the mower deck
or other attachments mounted to your
tractor.
CLUTCH/BRAKE PEDAL - Used for
declutching and braking the tractor and
starting the engine.
GEARSHIFT LEVER - Selects the speed
and direction of tractor.

IGNITION SWITCH - Used for starting
and stopping the engine.
LIFT LEVER PLUNGER - Used to
release attachment lift lever when
changing its position.
LIGHT SWITCH - Turns the headlights on
and off.
PARKING BRAKE LEVER - Locks
clutch/brake pedal into the brake
position.
THROTTLE/CHOKE CONTROL - Used
for starting and controlling engine speed.

Light Switch

Lift Lever
Plunger

Attachment
Lift Lever

Parking Brake Lever

Gearshift Lever

Ignition Switch

Attachment
Clutch Lever

Throttle/Choke
Control

Clutch/Brake
Pedal

Height
Adjustment
Indicator

38

2

1

OPTIONAL EQUIPMENT

Spark Arrester

29

44

46

32

31

33

37

33

40

62

13

4

85

14

38

15

78

78

81

3

16

23

45

TRACTOR -- MODEL NUMBER 259723

ENGINE

Summary of Contents for 173487

























Reviews: