Weco Micro Mag 302 MFK, Instruction Manual

Page: 11 / 34

Micro Mag 302 MFK
Cod.006.0001.1360
31/01/2018 v2.9
ENGLISH
11/34
3 COMMISSIONING
3.1 USER INTERFACE
CODE SYMBOL DESCRIPTION
L1
This LED illuminates to show an anomaly in the operating conditions.
See § 3.7 ALARMS MANAGEMENT page 16.
L2
Illumination of this LED indicates the display of the average voltage and current value measured during the final moments of
welding.
The value appears on the following displays: D1-D2
L3 This LED illuminates to confirm the presence of power on the output sockets.
L4
Illuminates to show a value in the following unit of measurement:
METRES PER MINUTE
L5 Illuminates to show a value in the following unit of measurement:
AMPERES
L6
Illuminates to show a value in the following unit of measurement:
MILLIMETRES
L7 Illuminates to show a value in the following unit of measurement:
SECONDS
L8 Illuminates to show a value in the following unit of measurement:
VOLTS
L9 Illuminates to show a value in the following unit of measurement:
PERCENTAGE
L10
When this LED illuminates the following parameter can be set:
WIRE FEED RATE
L11 When this LED illuminates the following parameter can be set:
WELDING CURRENT
L12 When this LED illuminates the following parameter can be set:
THICKNESS
L13
Illuminates to show that the required Synergic welding program can be set.
L10 Illumination shows that the following function has been activated: 2 stroke procedure.
L11 Illumination shows that the following function has been activated: 4 stroke procedure.
L12
Illumination shows that the following function has been activated: 3 stroke Special procedure.
Antwerpsesteenweg 949 9041 Gent - Oostakker
info@welda.be
www.welda.be
T +32 (0)9 355 74 26
F +32 (0)9 355 92 01