WEBTEC HPM110, Operation Manual

Page: 12 / 172

ENGLISH
Layout and function
12
3.1 Display
The HPM110 is screwed into an existing system and measures the
current pressure value. The current pressure (ACTUAL) is shown on the
display. The measured value is shown in the actual value display with
the appropriate unit. The MIN, MAX or FS value is shown in the lower
area of the display.
Display Description
Bar graph Displays the current pressure in graphical form.
Displays pressure peaks in the form of a pixel (line).
The display is updated at an interval of 50 ms (20
measurements/s).
Actual value Displays the actual pressure.
The display is updated at an interval of 300 ms (3
displays/s).
MIN/MAX Displays the MIN, MAX or FS value, depending on
the setting.
The display is updated at an interval of 300 ms (3
displays/s).
FS Full scale value (e.g. 600 bar).
Units Displays the set unit.