MultiPort/LT User Reference
Page 65
MultiPort/LT Gateway Code Commands
3.3.2.
Informational Commands
3.3.2.1. u - UpTime
This prints the Version, the Uptime (in seconds only, and hours, minutes and
seconds) and the number of restarts:
Wanda version 1.00: up 497768 seconds 5 days, 18:16:08 (0 restarts)
3.3.2.2. v - Version
The version command shows the following configuration information in
addition to the the MultiPort/LT gateway code Version, Hostname and IP
address (if configured):
Wanda version 3.0 Grass @ [131.161.200.13](using UDP port 768)
Configuration Information:
Date: 12/12/93, 10:01 AM
From: MultiPort Manager 1.0, by "Michael"
3.3.2.3. e - Flash EPROM Configuration
This prints out the configured IP address, the Subnetmask and the Broadcast,
Confighost, Gateway and Nameserver addresses:
EE IP address configuration data...
IP address 131.161.200.13; Mask 255.255.255.0 (0xFFFFFF00)
Broad 131.161.200.255; AA (conf) 131.161.200.2; Gate 131.161.200.1
Name 131.161.200.1; Boot 131.161.200.2 Debug 131.161.200.2
3.3.3.
Statistics Commands
3.3.3.1. B Buffer Statistics
Memory resources are allocated dynamically by the MultiPort/LT, rather than
having preallocated fixed limits. The statistics kept are:
refusals:
The count of the number of times a buffer
request was refused due to a lack of buffers.